Multiplex MULTIcharger LN-3008 Instrucciones página 7

1. Introduction
Congratulations on choosing the MULTIPLEX
MULTIcharger LN-3008 EQU, # 9 2540.
With the MULTIcharger LN-3008 EQU you
own a high-performance 12 Volt battery
charger which offers ultra-simple operation
and unique features in this class, such as an
integral EQUALIZER
individual cell voltages of LiXX batteries.
These are the essential feature of the
MULTIcharger LN-3008 EQU:
• Charges batteries containing 2 to 3S LiPo /
LiIo / LiFe cells and 4 to 8 NiMH / NiCd cells
• Integral EQUALIZER (with FlightPower /
Thunder Power-compatible connector
system)
MULTIPLEX Li-BATT BX batteries can
be connected directly to the EQUALIZER
port of the LN-3008 EQU. Separate
adaptor sets are available for batteries
with different connector systems: see
Chapter 8. - Accessories
• Ultra-simple to operate
We are sure that you will learn to appreciate
your MULTIPLEX MULTIcharger LN-3008
EQU after a brief period of getting to know the
machine; these Operating Instructions are
intended to help you through this phase.
Yours - the MULTIPLEX Team
MULTIPLEX Modellsport GmbH & Co.KG • Westliche Gewerbestraße 1 • D-75015 Bretten • www.multiplex-rc.de
Operating Instructions - MULTIcharger LN-3008 EQU
for balancing the
2. Specification
Input voltage
Battery types and
cell count
Charge current
(charging power)
Trickle charge
current
Integral
EQUALIZER
EQUALIZER
compensating
current
EQUALIZER
matching accuracy
Charge termination
methods
Charge connectors
EQUALIZER
connectors
Sockets for
connection to a
stabilised mains
PSU or a car
battery
Dimensions
Weight
2.1. The charger's software functions
• Automatic cell count detection of the battery
connected to the charger
• Charging of Lithium batteries with and
without EQUALIZER function
• Charging of Nickel batteries
2.2. The charger's safety functions
• Reverse polarity guard at input and output
• Protection from inadequate and excessive
input voltage
• Integral safety timer
• Status indicator LEDs
• User input confirmation buzzer
• Integral buzzer and LEDs for error display
11 - 15 V
LiPo/LiIo/LiFe: 2 - 3S cells
NiMH/NiCd: 4 - 8 cells
0.1 - 3 A
(max. 30 W)
0 - 100 mA
for 2 to 3S LiXX batteries
max. 42 mA
approx. 32.5 mV
Delta-Peak cut-off for
NiMH batteries (-3 mV / cell)
and for
NiCd batteries (-5 mV / cell)
Constant current/constant
voltage for LiXX batteries
Two 4 mm sockets
One MULTIPLEX /
FlightPower / Thunder
Power compatible socket
Two leads terminating in 4
mm banana plugs for direct
connection to a mains PSU.
Crocodile clips with 4 mm
sockets for connection to car
battery also supplied
approx. 120 x 80 x 25 mm
approx. 170 g
Page 7/29