Fenton RP162 Record Player HQ BT Manual De Instrucciones página 4

OVERVIEW
1. Autostop Switch ON/OFF
This switch turns auto stop on or off. When the automatic stop is enabled, the platform will start rotating as soon as the tone
arm is placed over the record and will stop rotating when it has reached the end of the record. Some vinyl records stop
before the end or do not stop when the end is reached. In this case set Auto-stop to OFF.
2. 33 / 45 / 78 RPM Switch
This switch controls the RPM of the turntable platter.
3. Pitch control
Turn to adjust the speed of the platter little by little.
4. Function switch knob
Knob to select BT, phono, aux or USB input.
5. LED indicator
6. Power & volume control knob
To power on the record player, turn this knob clockwise until it clicks. When powered on, use this knob to adjust the volume
for the internal speakers and headphones. To turn off the record player, turn this knob counter clockwise until it clicks.
7. Headphone connector
Connect your headphone with this 3.5mm(1/8) jack connector.
8. Cartridge with needle
When the turntable is not in use, it is recommendable to place the removable protection cover on the stylus.
9. Tonearm
10. Platter
Place your record here.
11. 45RPM Adaptor
This adaptor allows you to play 45RPM records.
12. USB port
To play music from a USB drive: Turn the mode selection knob to USB and plug in a USB drive to play music.
Press PLAY/PAUSE/REC to play or pause. Press PREV button to play the previous track, press NEXT button to play the
next track.
To record from vinyl: Plug your USB stick into the USB port. Press the REC button during the vinyl records playback and the
indicator will flash red and blue intermittently. The vinyl recording starts.
Press the SPLIT button when recording, the current record will be cut off and automatically stored in a file. Press SPLIT
button again and it will generate another file. Press the REC button to stop the recording. The indicator will be red during
recording, and the recorded files(MP3 format) will be saved in the USB stick.
13. PREV button
Press to play the previous track in USB mode.
14. PLAY/PAUSE/REC button
Press to play, pause or record in USB mode. Depending on the current status.
15. NEXT button
Press to play the next track in USB mode.
16. RCA Line output
The audio from a playing vinyl record is sent to this line-level coaxial audio output. This must not be connected to phono
level devices.
17. AUX input
3.5mm(1/8) jack connector for auxiliary input.
18. DC IN port
Connecting the 5Volt/DC power adaptor.
4