D-Link DWL-P50 Guía De Instalación Rápida página 2

Connecting The DWL-P50
P+DATA IN:connect a CAT
5 RJ-45 straight- through
cable from PoE switch.
LAN OUT:connect a CAT
5 RJ-45 straight- through
cable to an Ethernet
enabled device.
Use the Voltage Selector to set the DC output to 5V(11.5W) or 12V(12W)
depending upon your Network device's power specifications.
Voltage Selector:used to
select DC 5V (11.5W) or
12V (12W)
DC OUT:supplies 5V or
12V of power. Using the
included power cable,
connect to your Ethernet
enabled device's power.
2