iPhone/iPod section
DC 5V 1.0 A MAX
USB works with iPhone 5s, iPhone 5c,
iPhone 5, iPhone 4s, iPhone 4, iPhone 3GS,
iPhone 3G, iPod touch (2nd through 5th
generation), iPod classic, and iPod nano
(3rd through 7th generation).
Bluetooth technology works with iPhone 5s,
iPhone 5c, iPhone 5, iPhone 4s, iPhone 4,
iPhone 3GS, and iPod touch (4th and
5th generation).
You can use "SongPal" app with this receiver
via Bluetooth.
USB section
Supported format*
MP3 (MPEG 1 Audio Layer-3):
32 kbps – 320 kbps, VBR
WMA:
48 kbps – 192 kbps
AAC:
48 kbps – 320 kbps
WAV:
8 kHz – 48 kHz, 16 bit PCM
* Compatibility with all encoding/writing
software, recording devices and recording
media cannot be guaranteed.
Supported USB device
Mass Storage Class
Maximum current
500 mA
8
GB
Bluetooth section
Communication system
Bluetooth Specification version 3.0
Output
Bluetooth Specification Power Class 2
Maximum communication range
Line of sight approx. 10 m
Frequency band
2.4 GHz band (2.4000 GHz –
2.4835 GHz)
Modulation method
FHSS (Freq Hopping Spread Spectrum)
Compatible Bluetooth profiles
A2DP (Advanced Audio Distribution
Profile)
AVRCP 1.3 (Audio Video Remote
Control Profile)
3)
Supported Codecs
4)
SBC
, AAC, aptX
Transmission range (A2DP)
20 Hz – 20,000 Hz (Sampling frequency
44.1 kHz)
1)
The actual range will vary depending on factors
such as obstacles between devices, magnetic
fields around a microwave oven, static
electricity, cordless phone, reception
sensitivity, antenna's performance, operating
system, software application, etc.
2)
Bluetooth standard profiles indicate the purpose
of Bluetooth communication between devices.
3)
Codec: Audio signal compression and
conversion format
4)
Subband Codec
1)
2)