First Use; Checking The Light And The Packaging Contents; Charging The Light - Workzone 869 Manual Del Usuario

First use

First use
Checking the light and the package contents
NOTICE!
Risk of damage!
If you open the packaging carelessly using a sharp knife or other
sharp objects, the light may quickly become damaged.
1. Remove the light from the packaging
2. Check the package for completeness (see Fig. A).
3. Check whether the light or the individual parts are damaged. If this is the case, do
not use the light. Contact the manufacturer via the service address indicated on
the warranty card.

Charging the light

Before using the light for the first time, you must first fully charge the light's battery.
A full charge usually takes approx. 8 hours.
NOTICE!
Risk of damage!
Improperly handling the light may cause it to become damaged.
− Always switch off the light during the charging process.
1. Make sure that the light is switched off.
2. Unwind the USB charging
3. Plug the supplied micro-USB/USB cable into the micro-USB
Fig. B) and connect the cable to the USB power adapter
laptop, etc. that has a USB port.
4. While charging, the battery level indicator
5. As soon as the battery is fully charged, all four lights on the battery level indicator
will shine green. Disconnect the light from the power supply.
12
2 completely.
3
5
U , or a computer,
flashes green. (see Fig. B).
on the light (see