Product Description; Unpacking And Checking - Amann Girrbach steamer X3 Instrucciones De Servicio

O P e r at I n g I n s t r u C t I O n s
steaMer x3
Translation of the original operating instructions
Power switch
!
gB
Electrical power cord connection with
@
ground lead
Indicator lamp:
Green: „Device ready for use"
#
Red: „Heating in progress"
$
Orange: „Minimum water level
%
reached – turn off machine and refill."
Safety cap and filler neck
^
Holder for steam head
&
Steam head
*
Drainage screw
(
Gasket in safety cap
BL

PrOduCt desCrIPtIOn

Steamer X3 is a high quality, universal steam
cleaner for use in the following applications:
_ cleaning of models, dies, metallic structures, a
wide range of small objects, ceramics or plastic
prosthetics
_ removing of waxy residues
_ cleaning of articulators
_ cleaning of dental tools and instruments
_ cleaning of jewelry
10
A stainless steel tank with a capacity of 3.7 l is
integrated in the Steamer X3. The housing is
made of aluminium. The housing surface is smooth
for easy cleaning. Steamer X3 can be mounted
anywhere, independent of where the water hookup
is located. The cleaning system (140 °C/4 bar) is
always effective. When the minimum water level
has been reached, a warning light will turn on
and the heating system will automatically shut
down. Thanks to the structure of the boiler, satu-
rated steam will remain available for a certain
amount of time even after the heating system
has shut down.

unPaCkIng and CheCkIng

Once the package has been opened, check that
the instrument has not been damaged during
transport. A complaint must be immediately
lodged with the supplier if any damage is found.
The instrument is essentially ready-for-use upon
arrival. Check the voltage indications and make
sure that the voltage rating listed on the tag on
the back of the housing coincides with the line
voltage of the location where the instrument will
be used.
InstruMent InstallatIOn Or
eVentual Wall MOuntIng
Steamer X3 is designed to be used as either a
free-standing or a wall mounted device.
If used as a free-standing device, it is recommended
that it be placed on a stable surface.
Due to the production of heat and the convector
system for the dispersion of heat, the Steamer X3