Bond Mondavi 67505 Manual Del Usuario página 6

ASSEMBLY INSTRUCTIONS
1. Check that the control knob (F) for the gas
supply system is turned to the "OFF" position
before starting any assembly.
2. Put the 20 lb. propane gas tank (not included)
into the tank holder (D). Turn the wing screw on
the outside of the tank holder (D) clockwise to
tighten the tank into the tank holder.
DANGER
Propane tank must be a minimum of 60 inches
away at all times.
3. Turn the cylinder valve on the tank
clockwise to close the propane tank.
Attach the preassembled regulator
from the body (C) to the cylinder valve
by turning the regulator coupling nut
clockwise. Make sure it is fastened
securely and tighten connections by hand
only.
Bond Manufacturing Co., Inc. | Page 6
CYLINDER VALVE
BLACK COUPLING NUT
turn clockwise to connect
REGULATOR
F
D
PRESSURE
RELIEF VALVE
BLEED-OFF
VALVE
turn clockwise
to reseal