Guarantee Conditions - VGE PROFIHEATER xclear Manual Del Usario

INSTALLATION
• The ProfiHeater has 63 mm couplings for a glueable connection; glueable adapters to 50 mm are
provided. When using PVC tubing ensure that there is no strain on the connection to the frogs.
• Cut the tube connectors to the required length (or use the frogs) and twist these, as well as the
rubber sealing ring, into the 50 mm adapter by hand. Prevent any damage by only using the
connectors and frogs provided.
• Ensure that the apparatus never runs dry. For this reason, always ensure that the ProfiHeater is installed horizontally, with
the inlet and outlet on top. This ensures that there will always be water in the apparatus, even if the pump should fall out
accidentally.
• Connect the pump to the ProfiHeater and switch the pump on. Check the system for flow and
leakage. In case of leakage on the tube connectors, (never force them!) use a piece of Teflon tape
on the thread of the connection.
• Put the plug into the socket and set the thermostat to the desired temperature. As soon as the
set temperature has been reached, the light will go off.

GUARANTEE CONDITIONS

The product is guaranteed against manufacturing faults for 2 years from the date of purchase. No
guarantee can ever be given on the element burning out and causing a short. Guarantee claims can
only be handled if the product is returned post-paid and providing a valid proof of purchase
is included. Guarantee claims which are caused by installation or operating faults will not be
recognised. Defects arising from lack of maintenance do not fall under the guarantee. Guarantee
repairs may only be carried out by the supplier. The supplier can not be held liable for consequential
damage arising from failure, faulty maintenance or incorrect use of equipment. The guarantee will
lapse if extra facilities are added to the product or if changes are made to the product which are
not part of the standard equipment (for example the use of 'third-party' connectors, cutting off the
plug or the drilling of extra holes).
EN
XCLEAR PROFIHEATER | 5