Assembly Guide; C A U T I O N; Tools Needed - Blackstone 1842 Manual Del Propietário

Model 1842 | Owner's Manual |

Assembly Guide

!
WA R N I N G
The manufacturer has made every
ASSEMBLY INSTRUCTIONS
effort to eliminate any sharp
edges. However, you should Please read all instructions thoroughly before proceeding. Make sure all
handle all components with care
the plastic packing material is removed before assembling
to avoid accidental injury.
Find a large, clean area to assemble your griddle. Please refer to the parts list
Some parts may contain sharp
and assembly diagrams as necessary.
edges, especially as noted
Griddle assembly involves large components; therefore,
in these instructions. Wear
two people assemble the unit.
protective gloves if necessary.
!
WA R N I N G
S T E P 0 1
griddle feet to the bottom of the griddle in the pre-threaded holes. Ensure
The use of alcohol, prescription
that the fuel nozzle is housed within the burner opening.
or non-prescription drugs may
impair the consumer's ability
to properly assemble or safely
operate the appliance.
06
it is advised to have
Place griddle on a smooth flat surface and attach the four (4)
S T E P 0 2
Set the griddle on its feet and ensure that the ignition needle is
set 3-7mm above the burner tube.
II
3-7mm
S T E P 0 3
Place the griddle top onto the griddle body by aligning the four
pins to the corresponding holes. Make sure the pins are fully seated in the
holes. Place the grease cup on the back of the griddle body in the center of
the unit.
Assembly Guide | Owner's Manual | Model 1842
!

C A U T I O N

Two people are recommended for
the assembly of this product.
TOOLS NEEDED: Phillips Head
Screwdriver & Adjustable Wrench
07