Assembly Guide - Blackstone 1972 El Manual Del Propietario

Model 1972 | Owner's Manual |

Assembly Guide

!
WA R N I N G
The manufacturer has made
every effort to eliminate any
sharp edges. However, you ASSEMBLY INSTRUCTIONS
should handle all compo-
Please read all instructions thoroughly before proceeding. Make sure all
nents with care to avoid
accidental injury. the plastic packing material is removed before assembling
Some parts may contain
Find a large, clean area to assemble your griddle. Please refer to the parts list
sharp edges, especially
and assembly diagrams as necessary.
as noted in these instruc-
tions. Wear protective Griddle assembly involves large components; therefore,
gloves if necessary. two people assemble the unit.
!
WA R N I N G
The use of alcohol, prescrip-
S T E P 0 1
tion or non-prescription
drugs may impair the
M8 nuts from the four (4) griddle feet. Attach the four (4) griddle feet to the
consumer's ability to prop-
bottom of the griddle by screwing them into the four (4) M8 nuts.
erly assemble or safely
Ensure that the fuel nozzles are housed within the burner openings.
operate the appliance.
!
C A U T I O N
Two people are recom-
mended for the assembly
of this product.
08
it is advised to have
Place griddle on a smooth flat surface and seperate the four (4)
S T E P 0 2
Set the griddle on its feet and ensure that the ignition needles are
set 3-7mm above the burner tubes.
S T E P 0 3
Place the griddle top onto the griddle body by aligning the
four pins to the corresponding holes. Make sure the pins are fully seated in
the holes.
Assembly Guide | Owner's Manual | Model 1972
3-7mm
09