Timer Setting Mode; To Turn Off; Special Explanations - Furrion FIH1ZEA-BG Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Operation

Timer Setting Mode

Use "
" or "
" key to set and adjust the
timer. A short key press to adjust the time by
one minute and a long key press to adjust by
10 minutes. The maximum adjustable time is
2:59:00.
When in POWER or TEMP. Mode, press
to enter Timer Setting Mode, the TIMER LED
will be lit up and "0:00" displays on the
digital display.
1. Press "
" or "
minute. Press
setting.
2. Press "
" or "
desired hour.
3. Press
to confirm the setting. The timer
will be confirmed automatically after
10 seconds without any operating.

To Turn Off

When not in use, press the
unit off, you will hear a "beep" sound and all
the lights will be turned off. The unit enters
to standby mode and the LED displays as "H"
until the temperature cooled
below 140°F.
NOTE: Do not perform any cleaning process
or pull the power cord until the unit
cooled down.
9
" key to set the desired
key to enter hour
" key to set the
key to turn the

Special Explanations

● When the induction cooktop is turned off,
the cooling fan will work continually for
one minute to eliminate the heating up.
● If an improper cookware is used or the
cookware is removed from the cooktop,
the heating process will be stopped and
key
the error code "U" shows on the digital
display. The unit will sound every two
seconds and turn off automatically after
10 seconds unless a proper cookware is
replaced on the cooking zone.
● For best performance, use the cookware
designed for .
● If the induction cooktop is subjected to
high or low voltage fluctuations while in
operation, the unit will stop heating, and
display error message E3 (or E2). If the
voltage does not return to normal within
one (1) minute, the cooktop will shut
off automatically. If voltage fluctuations
occur while the unit is in standby mode,
the unit will display error messages E3
(or E2) together with a warning signal.
Please remove the induction cooktop
from its power source immediately.
● When using the cooktop, please keep the
black crystal top clean. Otherwise, some
staining or dark discoloration may appear
over time. Such stains or discoloration
will affect only the physical appearance of
the unit, not its actual performance.
Any other servicing should be performed by
an authorized service representative.

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido