Accessories; Heater; Heater Installation; Disposal Of Waste Materials - Avigilon ES-HD-HWS Manual De Instrucciones

7 Accessories

For further details on configuration and
use, refer to the relative manual.

7.1 Heater

7.1.1 Heater installation

Open the housing as described previously (6.1.1
How to open the housing, page 6).
Fix the heater kit to the prearranged points on the
body of the housing.
The pre-wired heating element (01) should
be positioned between the 2 dissipators (02)
before attachment to ensure contact and hence
guarantee correct heat transmission.
Pass the heating wiring under the fixing slide of
the camera.
01
Fig. 7
Plug the multipolar female connector into the
corresponding male connector (J3, 6.1.3 Board
description, page 7).
Reposition the internal slide.
Close the housing.
ES-HD-HWS/ES-HD-CWS/ES-HD-HWS-LG/ES-HD-CWS-LG
8 Disposal of waste
materials
Your product is designed and manufactured with
high quality materials and components which can
be recycled and reused.
This symbol means that electrical and electronic
equipment, at their end-of-life, should be disposed
of separately from your household waste.
Please dispose of this equipment at your local
Community waste collection or Recycling centre.
In the European Union there are separate
collection systems for used electrical and
electronic products.
02
02
This symbol mark and recycle system
are applied only to EU countries and not
applied to the countries in the other area
of the world.
9