Publicidad
Idiomas disponibles
Idiomas disponibles
Inspection:
1.
Make sure unit is straight and operates smoothly.
2.
Make sure the label is affixed to unit.
3.
Make sure trigger stop is not bent or damaged.
4.
Make sure cables are not kinked, frayed or damaged.
5.
Make sure metal components are not damaged.
6.
Make sure metal spoons and conical end fitting operate
smoothly and no metal burrs have occurred.
7.
When reusing a previously drilled hole, always inspect
the hole carefully.
Storage and Cleaning:
1.
Blow off unit after each use with compressed air.
2.
Store in clean dry environment.
3.
Store in secure locked area.
4.
Store and put away at the end of each work day.
5.
Do not pile any objects on top of unit during storage.
6.
Keep unit free of grease, oils and dirt.
7.
Never lend your unit to other workers.
Disposal:
1.
Dispose of unit after any fall has occurred.
2.
Dispose of unit if cable becomes kinked or bent.
3.
Dispose of unit if trigger stop is bent or damaged.
4.
Dispose of unit if trigger action is rough or sticky.
5.
Dispose of unit if return wire becomes bent or frayed.
6.
Proper disposal requires the unit's spoons be cut off
the return wires and thrown away.
DATE OF MANUFACTURE: ____________
Date
Inspection Items Noted
Honeywell Safety Products
I305 Rev B—Page 4 of 4
INSPECTION AND MAINTAINANCE LOG
MODEL NO.: ___________
Corrective Action
—
PH: 1-800-873-5242 FX: 1-800-892-4078 — www.millerfallprotection.com
P.O. Box 271, 1345 15th Street, Franklin, PA 16323 USA
LABELING
The following label must remain affixed to this product.
Company Logo
ANSI Z359.1 Mark
ANSI Z359.1 5,000 lbs.
Model # 496 / Batch 000
Manufactured Date
Manufactured 00/00/00
US Patent 6,729,821
US Patent 7,011,281
US Patent 7,357,363
Hole Diameter/Size
Hole Diameter/Size
WARNING DO NOT use in
wet or uncured concrete.
Use in normal weight
concrete with a compression
strength at least 3,000 PSI
(20.7 MPa) Use for Fall
All persons using this
equipment must read,
understand and follow all
instructions. Failure to do
so may result in serious
DATE PURCHASED: __________
Name of Inspector
Compliance:
OSHA
Batch Number
Model Number
Patent Markings
3/4"
3/4"
Protection Only
Warning Instructions
Warning:
injury or death.
Signature
Publicidad
