Troubleshooting; Storage; Disposal - Parkside PKZ 180 C5 Traducción Del Manual De Instrucciones Original

■ The appliance must be depressurised before all
cleaning and maintenance tasks. To do this,
open the release valve
escapes.
■ Clean the appliance regularly, preferably imme-
diately after completion of the work.
■ Clean the housing with a dry cloth – do NOT
use petrol, solvents or cleaners that can attack
the plastic.
■ Ventilation openings must never be obstructed.
NOTE
► Replacement parts not listed (such as adapter
nozzles, switch) can be ordered via our
service hotline.
► This appliance is maintenance free. Never
open the appliance. The appliance may only
be repaired by an authorised service centre
or Customer Service. If one of the faults listed
below occurs, note the following:
♦ Disconnect the appliance from any power
supply.
♦ Allow the appliance to cool down and wait a
short while for the residual energy to neutralise.
♦ Ensure that the appliance is in good working
condition.

Troubleshooting

Fault Solution
Check your power supply. Check
that all cables, fuses and the mains
socket are in working order.
Do not use excessively long exten-
Appliance
sion cables.
does not run
Do not use the appliance at
temperatures below +5 degrees.
Avoid overheating the motor.
Allow the motor to cool down.
Working Check the seals and the non-return
pressure too valve. Replace these if necessary.
low
Check the hoses, quick coupler
Tools do not
and the tools. Replace these if
work
necessary.
PKZ 180 C5
until no more air

Storage

NOTE
► Store the appliance in a dry and secure envir-
onment. Before storage, the appliance and
all connected compressed air tools should be
bled.
■ Disconnect the mains power plug and then
bleed the appliance and all connected
compressed air tools.
■ Store the appliance so that it cannot be used
by unauthorised persons.

Disposal

The packaging is made from environ-
mentally friendly material which can
be disposed of at your local recycling
plant.
Do not dispose of power tools
in the normal domestic waste!
European Directive 2012/19/EU
requires that worn-out power tools
be collected separately and recycled in an
environmentally compatible manner.
Your local community or municipal authorities can
provide information on how to dispose of the worn-
out appliance.
Dispose of the packaging in an environ-
mentally friendly manner. Note the
labelling on the packaging and sepa-
rate the packaging material compo-
nents for disposal if necessary. The packaging
material is labelled with abbreviations (a) and
numbers (b) with the following meanings:
1–7: plastics, 20–22: paper and cardboard,
80–98: composites.
Your local community or municipal
authorities can provide information
on how to dispose of the worn-out
product.
GB │ MT │
51 ■