Tabla De Contenido; Preface - ayerbe AY-1000 INS Manual Del Usario

1. Preface
2. General description
3. Preparation before starting
4. Using the generator set
5. Safety features (if fitted, see specifications table)
6. Maintenance schedule

1. Preface

1.1 Recommendations
Thank you for buying one of our generating sets. We recommend that yuo read this manual carefully and follow
the safety and maintenance advice and user instructions for our generating set very closely.
The information contained in this manual is taken from technical data available at the time of print. In the intention
of permanently improving the quality of our products, this information may be amended without warning.
1.2 Pictograms and plates on the generating sets and what they mean
Danger
Earth
STOP
1 2
A = Generating set model
B = Generating set output
C = Voltege
D = Amperage
E = Current frecuency
F = Power factor
1.3 Instructions and safety regulations
Danger
10
CONTENTS
Warning: risk of
electric shock.
Danger, risk of burns
1.- Importanat: refer to the documentation accompanying the generating set
2.- Warning: emission of toxic exhaust gases. Do not use in a confined or poorly
ventilated area
3.- Stop the motor before filling with fuel
3
KW: (B)
CE
Lwa
99,IB
Hz: (E)
(H)
Masse (Weight): (I)
Example of an identification plate
Do not ru the generating set without having put back the protective covers and closed
the access doors.
Never take the protective covers off or open the access doors if the generating set
is running.
7. Maintenance procedures
8. Storing the generating set
9. Fault finding
10. Specifications
11. Cable sizes
12. Conditions of warranty
13. EC Declaration of conformity
G = Protection rating
H = Generating set noise output
Wolt: (C) Amp: (D)
I = Generating set earth
Cos Phi: (F) IP: (G)
J = Reference Standandard
ISO 8528 - 8 Classe (J)
K = Serial number
Nº: 10/2004-----001 (K)
ENGLISH
Warning: the generating set is
supplied without oil. Always
check the oil level before
starting the generating set.