Configuration. User - Auta 760595 Manual Del Usuario

5
Configuration
▶ User menu
When the switchboard is at standby, it will be pressed
▷ Directory
Directory
Navigate OK Call
Exit
▷ Queue
Queue
Navigate OK Call
Exit
Erase
▷ Settings
Operation mode
Melody
Audio
Settings
Select OK Change
Exit
In this menu the list of flats belonging to the installation will appear. We can browse the different
registers and make a call.
For it we will follow the steps described in the "Functioning" section.
In this menu you will see the list of missed calls, made from flats, which have not been answered.
We can return a call or delete it directly. We will know that there are missed calls because the
switchboard will emit a blue flash every second.
Standard
Direct
Do not disturb
Operation mode: Standard
Select OK Change
Back
Type: 1 / 8
Number of tones: 4
Volume: - .
Back
Melody
Select OK Accept
+
Audio In: - | |
Audio Out: - | |
Back
Audio
Select OK Accept
+
Directory
Queue
Settings
Configuration
Main menu
Select OK Accept
Exit
Standard - The call from the street rings in CCI, if it cannot answer
it, it is automatically redirected to flats.
Direct - The call from the street rings directly at flats. The control
panel can only monitor. Do not intervene.
Do Not Disturb - The call from the street rings in central, if it cannot
answer it, it will end in it.
Type - Melody selection. There are 8 different.
Number of tones - Selection of the number of tones. "0" silence.
Volume - Tone volume selection.
Audio In - Adjusting the incoming audio volume.
Audio Out - Adjusting outgoing audio volume.
Bringing people together
EN