Installation Menu; Configuration. Installation - Auta 760595 Manual Del Usuario

6

▶ Installation menu

When the switchboard is at standby, it will be pressed
▷ Configuration
Directory management
Parameters
Password change
V40-170109
Configuration
Select OK Accept
Exit
Directory management
Parameters
Password change
V40-170109
Configuration
Select
OK Accept
Exit
Directory
Queue
Settings
Configuration
Main menu
Select OK
Exit
Display / Change
Add
Erase
Send
Directory management
Select OK Accept
Back
Display / Change
Add
Erase
Send
Directory management
Select OK Accept
Back
Display / Change
Add
Erase
Send
Directory management
Select OK Accept
Back
Display / Change
Add
Erase
Send
Directory management
Select
OK Accept
Back
Switchboard
Installation
Parameters
Select
OK Accept
Back
Switchboard
Installation
Parameters
Select
OK Accept
Back
Pass:
Configuration
Accept
Back
000001 m/t: 1 sdl:
J________________________ J_______
Display register
Navigate OK Edit
Back
Manual input
Remote input
Automatic input
Send
Add
Select OK Accept
Back
Selected register
Complete directory
Erase
Select OK Accept
Back
Selected register
Complete directory
Send
Select
OK Accept
Back
ID: 1
Status: MASTER
Manager: DISABLE
Panic: DISABLE
Switchboard
Select
OK Accept
Back
Pull-UP: OFF
Type: INTERNAL
Installation
Select
OK Accept
Back
Bringing people together
factory
9
OK Accept
Erase
000001 - Code we want to use to
call the flat. Up to 9 digits.
1
m/t - Binary code of the terminal
in flat.
sdl - Binary code of the sdl.
ONLY CCI AS EXTERNAL.
J___ - Free fields for informational
text.
Manual - The same fields indicated
above will be used.
Remote - Reception through PC.
Interface Auta USB (167097).
Automatic - "Hotel" type structure.
Register - Delete the selected
record.
Directory - Delete the entire
database.
Registro - Send the selected
record to PC.
Directorio - Send the entire
database to PC.
AUTA USB interface (167097)
ID: 1 - Central ID code. From 0 to 15.
Status - If there is more than one
central, 1 master the rest SLAVE.
Manager - The CCI only receives
calls from other CCI's. It can
perform to the entire system.
Panic - Operational mode only with
AVANT PANIC monitor.
Pull-UP - Line load is activated only
if the control panel does not have
any "Pull-UP: ON" panel or other
panel on its same data bus.
Type - INTERNAL, call to flats.
EXTERNAL, call to SDL's.
EN