Functioning - Auta 760595 Manual Del Usuario

7

Functioning

call and conversation
When a call is received from the entrance panel, the control unit starts to sound for a maximum of 30 seconds (see operating
modes). As standard, it performs 4 rings with intervals of 4 seconds between each of them.
During the call period the image will appear on the screen, if the board has a camera, or a blue background will be shown. The
control panel will show information about the user to whom the call is being made and the panel ID number from which it is
being called. The user can open directly, by pressing the button
conversation has a maximum of 90 seconds.
self-starting
Pressing the button
with the STREET PANEL / CCTV CAMERA that he wishes in case there is more than one in the installation.
The system will show the image, if the selected plate has a camera, and allow its opening by pressing the button
call to a flat
If you want to make a call to any flat in the database, you must pick up the handset. The screen will turn on automatically, the
user will have 2 options.
- Directly dial the call code of the apartment
- Search at housing directory by pressing
call to another guard porter
Pressing the button
can establish communication with any other guard porter that he wishes in the installation.
management of missed calls of flats
If the central station is in standby, the status LED flashes, it means that there are missed calls unmanaged. To access the call
queue, press the button
of the list we can return the call, by picking up the handset and pressing the key
If we return the call and the flat does not respond, the system will keep that call in the list as unattended. If the call is answered
at flat, the system will automatically delete the call from the list considering it attended.
transfer a call / make a query
When a call is received from a board, the user can see all the information of this call on the screen. From which access is being
called, to whom the call is directed ..., and even if the panel has a video camera, the person will be seen at the screen. Once
attended, the user can directly transfer the call to housing by pressing the button
porter loses control of the call, changing to "Busy line" mode.
The system also allows, instead of directly transferring the call to housing, that the user can make a query and check if they
want to answer the call, by pressing
monitor/phone. The control panel will switch to "Busy line" mode. If, on the other hand, the home does not want to answer the
call, they will hang up the handset and the user will press the button
external panel again.
redirect a call
The system allows the user to redirect a call from panel to the desired home. To do this, once attended, press the button
"Change" will appear on the screen. Then navigate through the directory
registry, you can transfer / consult the call, following the procedure described in the previous point.
, selecting the panel number
2
1
and after
, picking up the handset, selecting the guard porter ID number
. Once inside the list we can navigate through the different calls by pressing
. If you want to answer the call at home, you must press the button
, or pick up the handset to establish a conversation. The
and pressing , the user will be able to establish communication
4 5 6 and after
3 7 8 9 0
and pressing
, or directly suppress the call if desired.
. When the call is transferred, the guard
on the guard porter to communicate with the
until you find the desired record. Once in the
Bringing people together
EN
, the user
. In each record
on your
.