Gas Supply - Wolf ICBIM15/S Instrucciones De Instalación

W O L F

GAS SUPPLY

EXPLOSION HAZARD —
Securely tighten all gas connections.
Failure to do so can result in explosion,
I M P O R TA N T
fire or death.
N O T E
This installation
must conform with
local codes and
ordinances.
GAS
Model #
ICBIM15/S
ICBIM15/S-LP
10
MULTI-FUNCTION COOKTOP
R E Q U I R E M E N T S
R AT I N G
Total Heat
Output Gas
(Gas) Units
8.0 kW
581 g/h
The product rating plate, located on the under-
side of the cooktop, has information on the
type of gas that should be used. If this infor-
mation does not agree with the type of gas
available, contact your Wolf dealer. To obtain
local dealer information, visit the Locator
section of our website, wolfappliance.com.
An ISO 7-1 gas inlet thread is provided on all
units. Please contact your local Wolf dealer if
an ISO 228-1 or other gas inlet thread is
required. Pipe joint compounds suitable for
use with LP gas should be used. LP gas
suppliers usually determine the size and
materials used on the system.
If rigid pipe is used as a gas supply line, a
combination of pipe fittings must be used to
obtain an in-line connection to the cooktop.
All strains must be removed from the supply
and gas lines so the cooktop will be level and
in line.
Electrical Types and
Rating Gas Pressures
(Amps) Category (mbar)
I2H G20 at 20
0.17
I2E G20 at 20
I2E+ G20 at 20/25
0.17 I3P G31 at 37
Country of Destination
AT, DK, EE, FI, GR, IE, IT,
LT, NO, PT, ES, SE, SI, SK,
GB & CH
DE & PL
BE & FR
BE, CZ, FR, GR, IE, NL,
NO, PT, ES, GB & CH