When connected to a 100-volt or 70-volt line, do not use the switch settings marked "DO NOT USE"
F. Service.
Any maintenance must be performed by a trained electrician in accordance with
Federal Signal will service your equipment or provide technical assistance with any problems
that cannot be handled locally.
Any units returned to Federal Signal for service, inspection, or repair must be accompanied by
a Return Material Authorization. This R.M.A can be obtained from the local Distributor
or Manufacturer's Representative.
At this time a brief explanation of the service requested or the nature of the malfunction,
should be given.
Address all communications and shipments to:
G. EC Declaration of Conformity.
Manufacturer's Name:
Manufacturer's Address:
declares that the Product
Type of Equipment:
Brand Name (if any):
Model Number(s):
conforms to the following Standards:
EMC:
Supplementary Information:
This statement confirms that the product fulfills the EMC requirements of the Council Direc-
tives 89/336/EEC and 92/31/EEC.
Manufacturer's Signature:
Position: Engineering Manager
Location: Illinois
as this may result in excessive power driving the AM30T.
NEC guidelines and local codes.
FEDERAL SIGNAL CORPORATION
Electrical Products Division
Service Department
2645 Federal Signal Drive
University Park, IL 60466-3195
CAUTION
CAUTION
Federal Signal Corporation
2645 Federal Signal Drive
University Park, IL 60466-3195
U.S.A.
Class II, Paging Speaker with Transformer
AudioMaster
AM30T
EN 50081-1 : 1992
EN 50082-1 : 1992
Date: 04/17/96
-3-
®