BH FITNESS G6310 Instrucciones De Montaje Y Utilización página 15

Plug the unit into a wall socket with an
EARTH terminal. Set switch (L) to
Position [1].
ASSEMBLY INSTRUCTIONS
Take the unit out of the box and place
it on the floor as shown in Fig. 1.
We recommend another person's
help for assembly.
Check to see that it has all its parts:
(A8) Main structure; (B2) Lower knob;
(B5) Upper knob; 6mm Allen wrench;
5mm Allen wrench; (B34) Safety key;
Lubricant.
Follow each of the steps in the
assembly instructions.
1. RAILING ASSEMBLY.-
Lift the railing toward the arrow, until it
coincides with the first threaded hole
as shown in Fig 2.
NOTE: Ensure that the railing is well
adjusted in the first hole, and also
make sure that the railing is not at a
totally 90 degree angle with the floor.
Then take the knobs (B2) and screw
them clockwise according to the arrows.
Unfold the handgrips and fix position
using knobs (B5). Fig. 3.
Tighten knobs securely.
2 . ADJUSTING THE MONITOR.
Adjust support position by turning it as
indicated by the arrow, Fig 4.
Place the security key (B34).
Fig.B
3. FOLDING UP YOUR UNIT
To fold up your unit, vertically and
horizontally, stop the machine entirely
and unplug it from the power source.
HORIZONTAL FOLDING.-
With the machine
operating position release the knobs
(B2) and (B5), Fig. 5. Then fold the
railing to the folded position and place
the knob (B2) again to prevent it from
moving. Fig. 6.
VERTICAL FOLDING.-
If you wish to fold up the machine in a
completely vertical, fold the machine
horizontally and then lift it according to
the arrow (1). Fig. 7.
The lower structure will automatically
unfold when the machine is in vertical
position to give stability to the whole
unit.
4.UNFOLDING YOUR UNIT
To unfold the machine carry out the
procedure in reverse.
If the machine is horizontally folded,
fold the bottom frame first with your
foot. Fig 8.
MOVEMENT & STORAGE.
The unit is equipped with wheels
(B7), Fig. (9) to make it easier to
move. Make sure that the mains
cable is unplugged from the wall
socket. If you wish to move the
treadmill, hold at the back and lift the
treadmill until the transport wheels
(B7) rest on the ground, Fig. 9. To
prevent accidents DO NOT move the
treadmill across uneven fl oors.
15
in its normal