Installing The Usb Driver On Windows Xp; Installing The Usb Driver On Windows 7 Or Vista - Honeywell Talkman A700 Guía De Producto

1. Sostenga el Talkman A730 sujetándolo como si lo estrechara con la mano y orientando el escáner en
dirección contraria a usted.
2. Ponga el dispositivo de modo que el escáner esté a entre 10 cm y 92 cm de distancia del código de barras
que desee leer. Tenga en cuenta que la precisión del escaneado puede disminuir a distancias mayores.
3. Presione y mantenga presionado el botón negro redondo para activar el escáner.
4. Dirija el marco iluminado para apuntar de modo que contenga todo el código de barras.
5. Cuando el escaneado se realice correctamente, se apagará el marco para apuntar y se oirá un pitido en
los auriculares.
Nota: El pitido que indica un escaneado está activado por defecto, pero puede desactivarse poniendo
el parámetro EnableBeepOnBarcodeScan a 0. El volumen del pitido se controla mediante el volumen
del dispositivo y puede ajustarse con los botones de más (+) y menos (-).

Installing the USB Driver on Windows XP

When you connect an A700 device to your Windows PC, the PC will search for a USB driver to install. If the
PC is configured to search for drivers online and the connection succeeds, the driver will install automatically
and the A700 device will be ready to use. If the automatic installation fails, follow these steps.
1. Navigate to the .inf and .cat files in the USB Driver folder on the VoiceConsole software DVD and save
both files to your computer.
2. Open Device Manager and locate Talkman USB Serial.
3. Right click it and select Update Driver.
4. When prompted with Can Windows connect to Windows Update to search for software?, select No,
not at this time.
5. Select Install from a list or specific location (advanced).
6. Click Have Disk. Navigate to the location where you saved the .inf and .cat files.
7. Select the TalkmanUsbSerial.inf file. If there is a driver warning, click Continue Anyway.

Installing the USB Driver on Windows 7 or Vista

When you connect an A700 device to your Windows PC, the PC will search for a USB driver to install. If the
PC is configured to search for drivers online and the connection succeeds, the driver will install automatically
and the A700 device will be ready to use. If the automatic installation fails, follow these steps.
1. Navigate to the .inf and .cat files in the USB Driver folder on the VoiceConsole software DVD and save
both files to your computer.
2. Open Device Manager and locate Talkman USB Serial.
3. Right click it and select Update Driver.
4. Select Browse my computer for driver software.
5. Select Let me pick from a list of device drivers on my computer.
6. Click Have Disk. Navigate to the location where you saved the .inf and .cat files.
7. Select the TalkmanUsbSerial.inf file. If there is a driver warning, or a prompt about proceeding, indicate
that you want to continue.
Confidencial: Sólo para uso informativo por revendedores y clientes de Honeywell sólo
Uso del dispositivo Talkman A700 | 27