Handling The Appliance; Starting Your Appliance And Temperature Control; Control Panel; Temperature Control Buttons - Electrolux AEG S 70170 TK38 Libro De Instrucciones

GB

Handling the appliance

Starting your
temperature control
1. Insert the plug into the wall socket.
2. Press the ON/OFF button. The green control light is on.
3. Press the "+" (3) or "-" (5) button. The temperature
display switches to showing the set temperature.
Note: Concerning secure food storage temperatures, a
refrigerator temperature of 5?C can be regarded as
cold enough.
4. The compressor starts and goes on working
automatically.
Attention! When you change the settings, the
compressor will not start immediately if it is doing
automatic defrosting at that moment.
5. Since the refrigerator quickly reaches the storage
temperature after being switched on, you can place
the food in immediately.
The next paragraph will give instructions for setting.

Control panel

1. ON/OFF control light (green)
2. ON/OFF switch
3. Temperature setting buttons (to increase the
temperature)
4. Temperature display
5. Temperature setting buttons (to decrease the
temperature)
6. COOLMATIC indicator light (yellow)
7. Push button for COOLMATIC

Temperature control buttons

The temperature can be adjusted with the "+" (warmer)
and "-" (colder) buttons.
These buttons belong to the temperature display.
If you press the "+" (3) or "-" (5) button, , the
temperature display will switch from the actual
temperature (constantly luminous temperature
display field) to the desired temperature (flashing
temperature display field).
By pressing any of the two buttons the desired
temperature can be modified by 1°C.
If the adjustment is stopped and neither button is
pressed, the temperature display will switch back to its
36
appliance and
original function and show the actual temperature
after a short while (about 5 seconds).
The appropriate storage temperature of food and drink is
+5°C.
Temperature Display
The temperature display shows various information:
During normal operation the temperature inside the
refrigerator (actual temperature) is displayed on the
temperature display.
At the time of switching on or heating up, the
temperature display will show the „-„ sign until the
cold compartment cools down to a temperature
between +9 °C and +2 °C.
When the temperature is being adjusted, the
temperature currently set (desired temperature)
flashes on the display field.
Attention! The display field shows the actual temperature
with a delay of maximum 24 hours.
COOLMATIC button
The COOLMATIC function serves for quickly cooling down
a vast amount of fresh food put into the refrigerator, for
example drinks and salads prepared for a party.
1. The COOLMATIC function can be switched on by
pressing the COOLMATIC button (7). The yellow
indicator light (6) is on.
2. The COOLMATIC function provides intensive cooling.
The refrigerator automatically switches to a
temperature of +2°C. The COOLMATIC function turns
off automatically after running for 6 hours. The
refrigerator switches back to the originally set
temperature which is valid again. The actual
temperature of the fridge can be seen on the display.
3. The COOLMATIC function can be turned off manually
by pressing the COOLMATIC button again at any time.
The yellow light goes out.
After turning on the COOLMATIC function the set
temperature must not be altered.
Holiday function
The holiday function sets the temperature at +15°C. This
function allows you to keep the refrigerator shut and
empty during a long holiday period (e.g. the summer
holidays) without the formation of a bad smell.
1. To turn on the holiday function, press button (3).
2. Press continuosly button (3) until the letter "H"
(Holiday) appears on the temperature indicator. The
temperature indicator can modify the displayed
temperature degree by degree up to +8°C. Above +8°C the
display will show the letter „H". The inside temperature can
reach +15°C.
Now the refrigerator is in the "holiday" function in the
energy-saving mode.
The fridge compartment must be empty with
holiday function on.