Remote Control - Onix DAC 25B Guia Del Usuario

Thank you for purchasing ONIX Electronics. With sincere appreciation, we suggest that you should read this User's
Manual thoroughly before operation and keep the Manual properly for further reference. .
INSTALLATION
I n s t a l l t h e u n i t i n a we l l ve nt i l ate d p l a ce a n d n o t
exposed to high temperatures or humidity, nor any heat
sources such as heaters or radiators. Be sure to leave
space around the unit for ventilation to improve heat
radiation (at least 30 cm at top, 10 cm at rear, and 20 cm
at each side). If not enough space is provided between the
unit and walls or other equipment, heat will build up inside, interfering with performance or causing malfunctions.
CONNECTIONS
Before making or changing the connections, switch o the power switch to prevent damaging the product.
CONNECTING THE PIN-RCA CORDS
1
Left channel
3
White plug
R
Connect the white plug 3 to the L (left) channel 1,
and the red plug 4 to the R (right) channel 2.
Be sure to push the plugs securely.

Remote Control

To operate the remote
control requires two battery of
AAA 1.5 V, which are not included.
The DAC player is equipped with lters for the suppression of radio interference in accordance with EEC regulation
USER'S GUIDE
L
2
Right channel
4
Red plug
The remote control
is an optional part.
MAINTENANCE OF EXTERNAL SURFACES
Remove dust and dirt with a clean, dry cloth.
Never use solvents, gasoline, insecticide sprays and other
chemicals on or near the equipment because they can
corrode the surfaces.
POWER-CORD CAUTION
Handle the power cord by the plug. Do not pull out the
plug by tugging the cord and never touch the power cord
when your hands are wet as this could cause a short circuit
or electric shock.
Input selector key
Previous/next keys
Play/pause key
Note: Keys not describe are not
intended for the machine. It is normal
if there is no respons pushing
Switch (Set switch to DAC)
them.
3