Special Functions - AVS Electronics OUTSPIDER PA Manual Del Usuario

Special functions

Thanks to the software from HPWIN PC, it is possible to make the best use of digital technology potential.
HPWIN allows each sensor:
Check:
chart of signals from the two infrared (selectable)
w
chart of microwave signal (Outspider DT and DT WS(UB)(U) Mod.)
w
(selectable)
antimask signal chart (selectable)
w
state of Alarm and Tamper outputs
w
input status (AUX) (Mod. Outspider PA and Outspider DT)
w
Antimask output status
w
F output status (Dirty lenses)
w
microwave status (alarm / rest) (Mod. Outspider DT and Outspider
E
w
DTWS(UB)(U))
N sensor diagnostics (temperature, power supply and type of connection)
w
alarms history with more than 1900 memorisations complete of date and
w
G
time
individual sensor status synoptic (direct USB connection) or of all sensors
w
(connection to the XSATHP by way of RS 485) (Mod. Outspider PA and
Outspider DT)
signal adjustments archive for sensor
w
Management:
infrared sensitivity adjustment
w
microwave operational mode
w
microwave sensitivity adjustment (only reduction)
w
activation/exclusion of Antimask function
w
alarm saving mode
w
signals recording
w
select functioning mode (Mod. Outspider PA and Outspider DT):
w
AND mode
w
SECURITY mode
w
firmware upgrade (not active in PSTN/GSM)
w
Once the management software is installed it is is necessary to create a "Nuovo Codice (New numerical Code)" in "Anagrafica Clienti (Customer Master)" and
define that it is an HP / OutSpider BM.
Return to the initial screen
Activation of the USB / Phone connection, for displaying
and managing sensor settings
Activation of USB / Phone connection for a simultaneous
display the status of sensors
Activation of the USB / Phone connection for displaying
and managing the sensor alarms history
Function not handles by the sensor
Access to the local archive for recording signals manually
carried out by the installer
Access to personal notes for the system
Activation of the sensor firmware update procedure
- 23 -