Maintenance And Cleaning - Wurth Master MH 3-XE Traducción Del Manual De Instrucciones De Servicio Original

OBJ_BUCH-742-003.book Page 15 Monday, December 19, 2011 7:52 AM
Changing the position of the chisel
The chisel can be locked in 12 positions. In this man-
ner, the optimum working position can be set for each
application.
Insert the chisel into the tool holder.
Push the chisel adjustment ring 3 forward and turn the
chisel to the required position with the chisel adjust-
ment ring 3.
Release the chisel adjustment ring 3 and turn the
chisel until it latches.

Maintenance and Cleaning

❏ Before any work on the machine itself, pull
the mains plug.
❏ For safe and proper working, always keep
the machine and ventilation slots clean.
❏ A damaged dust protection cap should be
changed immediately. We recommend
having this carried out by an after-sales
service.
Lubrication
The power tool is oil-lubricated. An oil change is
required only within the scope of maintenance or
repair on behalf of an authorized customer service
agent for Würth power tools. Using the specified
Würth oil is essential.
When replacing the power tool's cable is required,
have this carried out by a Würth master-Service or by
an authorised customer services agent for Würth
power tools, in order to avoid hazardous situations.
If the machine should fail despite the care taken in
manufacturing and testing procedures, repair should
be carried out by a Würth master-Service.
In all correspondence and spare parts orders, please
always include the article number given on the type
plate of the machine.
The current spare parts list for this power tool can be
viewed in the Internet under
"http://www.wuerth.com/partsmanager"
or be requested from your next Würth branch office.
Guarantee
For this Würth power tool, we provide a guarantee in
accordance with the legal/country-specific regula-
tions from the date of purchase (verified by invoice or
delivery document). Damage that has occurred will
be corrected by replacement or repair.
Damage caused by normal wear, overloading or
improper handling is excluded from the guarantee.
Claims can only be accepted if the power tool is sent
undisassembled to a Würth branch office, your Würth
sales representative or a customer service agent for
Würth power tools.
Disposal
The machine, accessories and packaging should be
sorted for environmental-friendly recycling.
Only for EC countries:
Do not dispose of power tools into house-
hold waste!
According to the European Guideline
2002/96/EC for Waste Electrical and Elec-
tronic Equipment and its implementation
into national right, power tools that are no longer
usable must be collected separately and disposed of
in an environmentally correct manner.
Subject to change without notice.
15