Scan The Entire Symbol; What Does The Beep Mean - Symbol LS 4000 Manual Del Usuario

Q u i c k
Aiming

Scan the Entire Symbol

• The scan beam must cross every bar and space on the symbol
(as in the left bar code below).
• The larger the symbol, the farther away you should hold the
scanner.
• Hold the scanner closer for symbols with bars that are close
together.
Right
Note: LS 4000 series scanners require no user maintenance.

What Does The Beep Mean?

When you hear 1 beep (short high tone) it means data has been
decoded successfully. If any other beeps are heard, contact the
technical person in charge of scanning.
R e f e r e n c e
5
Wrong