Briteq BT-Strobe 3000 Manual De Instrucciones página 8

ENGLISH
Operation via a DMX controller:
 Connect the DMX controller to one or more strobes as shown on the picture
 Connect the device to the mains
 Set the desired channel mode (ChMd) on the strobes: 1, 2, 3 or 4 channels (see DMX charts)
 Set the desired DMX-address on the strobes.
 Now you can control the strobes via DMX.
DMX-CHART FOR 1CH:
CHANNEL VALUE
DMX-CHART FOR 2CH:
CHANNEL VALUE
DMX-CHART FOR 3CH:
CHANNEL VALUE
DMX-CHART FOR 4CH:
CHANNEL VALUE
BRITEQ
®
000 - 005 Blackout
1
From slow to fast
006 - 250
Blinder function
251 - 255
Blackout
000 - 005
1
1 Flash trigger
006 - 037
038 - 247 From slow to fast
Blinder function
248 - 255
2
000 - 005 Blackout
From 0% to 100%
006 - 255
1
000 - 005 Blackout
From 0% to 100%
006 - 255
2
000 - 255 From short (0ms) to long (650ms)
3
Blackout
000 - 005
006 - 255 From slow to fast
1
Blackout
000 - 005
006 - 255 From 0% to 100%
2
From short (0ms) to long (650ms)
000 - 255
3
Blackout
000 - 005
6/42
FUNCTION
Flash rate
FUNCTION
Flash rate
Intensity (dimmer)
FUNCTION
Intensity (dimmer)
Flash Duration
Flash rate
FUNCTION
Intensity (dimmer)
Flash Duration
Flash rate
USER MANUAL
BT-STROBE 3000