Adjusting Your Mask; Removing Your Mask - ResMed AirFit F30 Manual De Instrucciones

1. Twist and pull both magnetic clips away from the frame.
2. Place the cushion under your nose and ensure it sits comfortably
against your face. With the ResMed logo on the headgear facing up,
pull the headgear over your head.
3. Bring the lower headgear straps under your ears and attach the
magnetic clips to the frame.
4. Undo the fastening tabs on the upper headgear straps and pull evenly.
Repeat with the lower headgear straps.
5. If the headgear is too close to the ear, adjust the top headgear strap
6. Connect the device air tubing to the elbow and attach the elbow to
the mask, ensuring that it clicks in place.

Adjusting your mask

• With the device turned on and blowing air, adjust the position of the
cushion for the most comfortable fit under your nose. Ensure that the
cushion is not creased and the headgear is not twisted.
• To fix any leaks at the upper or lower part of the mask, adjust the top,
upper or lower headgear straps. Adjust only enough for a comfortable
seal and do not overtighten.

Removing your mask

1. Twist and pull both magnetic clips away from the frame.
2. Pull the mask away from your face and back over your head.
English 3