KEENCUT JAVELIN Instrucciones página 2

1
Only lift or move the Javelin/Practik using the grip on the top
edge of the cutter bar. If there is a need to handle the cutter in
any other way or to move it away from its cutting bench, the
SAFETY
blade must be removed first.
WARNING
It is essential that the Javelin/Practik is used on a flat surface to cut accurately.
A warped or bowed table top can induce a twist in the Javelin/Practik
Inserting and setting the blade
The blade is inserted from the back of the blade holder, push it fully forward and
tighten the wingbolt.
To set the blade for a repeatable cutting depth unclamp the blade and turn the knob
at the front of the cutter, clockwise to increase blade depth & counter clockwise to
decrease.
Setting Up
resulting in a bowed cut.
1