Volume Adjustment - Trevi XR 90 BT Guía De Uso

CHARGING
The speaker must be recharged when switched off.
1. Using the supplied USB cable, connect the side of the jack to Micro USB
microUSB socket (8) and the other end to the USB port of your PC.
2. Led indicator(6) will light up red to indicate the charging status, after charging
it will off.
BASIC OPERATION
To turn on the speaker, press and hold the on / off button (1).
Press the MODE button (2) to choose from:
- Bluetooth mode.
- Micro SD mode, if present a micro SD type memory in the slot (9) it will start
playback of the music automatically.
- USB Mode, if present a USB-type memory in the slot (9), the device will start
playing songs automatically.
- LINE IN mode, if entered the stereo cable Jack / Jack 3.5mm AUX in jack (10).
- Radio Mode.
To turn off the speaker, press and hold the on / off button (1).

VOLUME ADJUSTMENT

Press and hold the Volume - (3), Volume + (4) to adjust the volume.
OPERATION IN LINE
- Turn on the speaker Press and hold the on / off button (1).
- Connect the cable to the jack AUX IN jack (10) and the other end to the external
device.
- Start from the external device playback.
OPERATION MICRO SD CARD / USB MEMORY
- Turn on the speaker Press and hold the on / off button (1).
- Insert a Micro SD card into the slot (9) holding the contacts facing the rear of the
device or insert a USB memory.
- Playback will start automatically.
- Press once on the (3) button to skip to the previous track, press the button once
(4) to move to the next track.
- Press the button (1) to pause, to resume playback press again.
BLUETOOTH OPERATION
COUPLING DEVICES
1. Place the speaker next to the Bluetooth device to be coupled.
2. Turn on the speaker Press and hold the on / off button (1), LED charging / BT
(6) will begin to flash quickly (light blue), the speaker is so in pairing mode.
3. Follow the instructions of your device to search the speaker.
4. Search for the speaker named "XR 90 BT" or "Y130" and enter the PIN "0000"