Volume Adjustment; Aux In Operation; Bluetooth Operation - Trevi XR 86 BT Manual Del Usuario

VOLUME ADJUSTMENT

Press and hold the Volume - (6), Volume + (9) keys to adjust the volume.

AUX IN OPERATION

- Turn on the speaker.
- Connect a cable with a 3.5mm jack to the AUX IN socket (5) and the other end to the
external device, the device will automatically switch to the Aux In input.
- Start playback from the external device.
MICRO SD CARD OPERATION / USB MEMORY
- Turn on the speaker.
- Insert a Micro SD card into the slot (2) keeping the electrical contacts facing the USB
socket or insert a USB memory in the slot (1).
- Playback will start automatically.
- Press the - (6) key once to move to the previous track, press the + (9) key once to move
to the next track.
- Press the button (8) to pause, press it again to resume
playback.

BLUETOOTH OPERATION

COUPLING TO THE DEVICES
1. Place the speaker near the Bluetooth device to be paired.
2. Turn on the speaker and long press the MODE button (8) to select the BT mode.
3. Follow the instructions of your device to search for the speaker.
4. Search for and pair the speaker named "XR 86 BT" and enter the PIN "0000" if
required.
5. Once paired (you will hear a confirmation from the "BT device is connected successfully"
voice) you will be able to play the music tracks.
Note:
- The Bluetooth speaker works only with one connection at a time, the
connection can not be interrupted during normal operation.
- When Bluetooth pairing with external devices fails, delete another one
Bluetooth device in the connection list, restart the Bluetooth speaker and look again for
the signal.
COMMANDS AVAILABLE IN BLUETOOTH MODE
- To start music playback, start it from your device.
- Press the - (6) key once to move to the previous track, press the + (9) key once to move
to the next track.
- Press the button (8) to pause, to resume music playback press it again.
In case of connection with a telephone, when a call is received, the guide voice of the
speaker will alert with a message.
- Press the button (8) once to open the call and activate the hands-free function,
press it again to end the call.
- Long press the button (8) to reject the call.