KTM TOURING CASE LEFT 42 L Manual Del Usuario página 7

3
1
Scope of supply:
2
1x plastic case, left (1)
1x locking cylinder, plastic case (3)
1x plastic case, right (2)
1x locking cylinder, plastic case (3)
It is important to read the following notes before using the cases.
WHEN THE CASES ARE MOUNTED, ESPECIALLY WHEN THEY ARE LOA-
DED, GREATER SIDE WIND SUSCEPTIBILITY WILL CAUSE A CHANGE IN
VEHICLE HANDLING CHARACTERISTICS WHILE RIDING, TAKING CURVES,
AND BRAKING. EXERCISE CAUTION IN HIGH WINDS. BECAUSE OF THE
CHANGED HANDLING CHARACTERISTICS, APPROACH THE RECOM-
MENDED MAXIMUM SPEED OF 150 KM/H SLOWLY.
Always use two cases at the same time and distribute the load evenly bet-
ween the two sides.
Secure the load against slipping.
Ensure that the load never exceeds 10 kg per case.
When cleaning with a pressure cleaner, keep a distance of at least one meter
away from the cases.
Opening the case
- Key position: 90° to the right.
- Push in the push buttons on the left and right: The case can be opened.
Closing the case
- The push buttons must be pushed in on the left and right: The case can be
closed.
- Push the lid closed firmly with both hands on the closures until the buttons
jump out. This indicates that the closures have engaged and the case is closed.
- Return the key to the locked position and pull it out.
Assembly
- Turn the key 45° counterclockwise.
- Swivel out the locking lever (4).
4
60312924100
60312924050
60312925100
60312924050
7