Stalgast 9732010 Manual De Instrucciones página 17

Do not use direct high pressure jets of water (for example from a pressure washer) to clean the appliance
since it could ruin internal components
It is also forbidden to use silver cleaning agents, and it is advisable to pay special attention to hydrochloric or
sulfuric vapors derived from, e.g., floor cleaning.
Once a month, please check whether:
•
all gas and electrical connections are executed properly
•
the power cord hasn't been damaged
•
all the components of the device are working properly.
•
the ventilation system is working properly
Once a year the device should be inspected by the technical service in order to check the degree of wear
and to identify possible faults of the components and parts of the device. In case any faults are detected,
they have to be removed by qualified technical personnel (technical service).
Monthly maintenance, annual service and repair of the device should only be carried out by qualified
technical personnel (technical service).
6. TROUBLESHOOTING
The main burner pilot
does not work
The pilot's flame is
not retained
The main burner does
not work.
Main burner flame
burns yellow
No spark on the pilot
7. DISPOSING OF USED EQUIPMENT
Information for users about the proper principles of disposal of waste electric and electronic
equipment
•
Leave the old device in the store where you are buying a new device. Each store has an obliga-
tion to take your old equipment free of charge if you buy new equipment of the same type and in the
same quantity. The only condition is to deliver the equipment to the store at your own expense.
•
Take the used device to a collection point. You will find information about the nearest location on
the municipal website or bulletin board of the municipal office.
•
Leave the device at the service point. If the repair of the device is uneconomical or impossible for
technical reasons, the service is obliged accept the device free of charge.
•
Return used equipment without leaving your house. If you don't have the time or ability to trans-
port your equipment to a collection point, you can use the services of specialized companies.
Remember! Do not dispose of used equipment along with household waste.
This could cause high fines.
The symbol of the crossed-out waste bin on the product, its packaging or the instruction
manual means that the product should not be disposed of to normal waste bins. The user is
obliged to hand over the used equipment to a designated collection point for proper
processing.
•
Gas pressure is too low
•
The pilot nozzle is clogged.
•
The gas valve is defective.
•
Electrode damaged
•
Broken thermocouple or insufficiently heated by
the pilot flame.
•
Gas pressure is too low
•
The main burner nozzle is clogged
•
The gas valve is defective.
•
Wrong amount of air supplied to the main
burner - requires adjustment of the sleeve at the
main burner nozzle
•
Soiled main burner - holes
•
Make sure the unit is connected to the mains
•
Check the wiring connections
•
Electrode damaged
- 19 -
Please call
MAINTENANCE