Refueling The Machine - Wacker Neuson PT2A Manual Del Operador

Ocultar thumbs Ver también para PT2A:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Operation
4.3

Refueling the Machine

Requirements ■ Machine shut down
■ Engine cool
■ Machine/fuel tank level with the ground
■ Fresh, clean fuel supply
Perform the procedure below to refuel the machine.
Procedure
WARNING
Fire hazard. Fuel and its vapors are extremely flammable. Burning fuel can cause
severe burns.
► Keep all sources of ignition away from the machine while refueling.
► Do not refuel if the machine is positioned in a truck fitted with a plastic bed liner.
Static electricity can ignite the fuel or fuel vapors.
► Refuel only when the machine is outdoors.
► Clean up spilled fuel immediately.
1. Remove the fuel cap (a).
a
2. Fill the fuel tank to the base of the neck.
CAUTION
Fire and health hazard. Fuel expands when heated. Expanding fuel in an over-filled
tank can lead to spills and leaks.
► Do not overfill the fuel tank.
3. Reinstall the fuel cap.
wc_gr014835
24
PT2A / PT3A / PT4A
wc_tx004594en.fm

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Pt3aPt4a

Tabla de contenido