Key To Symbols Used - Imetec 61401 Instrucciones De Uso

• If the appliance is faulty or malfunctions, switch it off and do not
tamper with it. Contact an authorised technical service centre for any
repairs.
• If the supply cord is damaged it must be replaced by an authorised
technical service centre, so as to prevent all risks.
• This appliance shall not come into contact with water, other liquids,
spray, steam. For any cleaning and maintenance operation refer to
the instructions in the relevant chapter.
• DO NOT use this appliance near a washbasin or a sink filled with
water. During use the appliance must be placed in such a way that it
cannot fall in the washbasin or the sink.
• This appliance must be placed on a flat, stable surface.
• See the external packaging for the characteristics of the appliance.
• Use the appliance only with the supplied accessories that are an
essential part of the appliance.
• This appliance is not intended to be operated by means of an external
timer or separate remote-control system or any other similar system.
• DO NOT use near a hob. The supply cord shall not come into
contact with hot, incandescent surfaces, open flames, pots and other
utensils.
• DO NOT leave food in contact with the appliance for any longer
than is necessary for preparation.
• Switch off the appliance and disconnect from supply before changing
accessories or approaching parts that move in use.
Warning/Danger
Class II appliance

KEY TO SYMBOLS USED

Prohibited
EN
11