Diagram And Parts Description - Alesis TRANSACTIVE DRUMMER WIRELESS Guia Del Usuario

Diagram and Parts Description

1. Power In (IEC): Use the included power cable to
connect TransActive Drummer Wireless to a
power outlet. While the power is switched off,
plug the power cable into the TransActive
Drummer Wireless first, then plug the cable into
a power outlet.
2. Voltage Selector*: Set this to
the correct voltage for your
country/region.
3. Power On/Off Switch: Powers
TransActive Drummer Wireless
on or off.
4. Auxiliary Input: This stereo
RCA input can be used to
connect a CD player or other
audio source.
5. Line Input:
external sound sources to these
inputs. Each input can accept a
1/4" connection. This allows for
several connection options (e.g.,
1 stereo source such as a drum
module, CD player, or sampler,
2 microphones, 1 or 2 mono
sources).
6. Master Output:
mixer, PA system, or other
device to these outputs using
1/4" cables. Adjust the level of these outputs with the MASTER VOLUME knob on the top panel.
7. Stereo Link Output: Connect a 1/4" stereo (TRS) cable to this line-level output to connect another
amplification device, such as another TransActive Drummer Wireless. When you connect this output to
another TransActive Drummer Wireless, you will be able to use the inputs of both TransActive
Drummer Wirelesss simultaneously with a full stereo image and the combined wattage of 200 W.
8. Stereo Link Selector: When using two connected TransActive Drummer Wirelesss, set one speaker's
Stereo Link Selector to the "left" and the other to the "right" for a full stereo image. When in the "Off"
position, the summed left and right channels will be heard out of that speaker.
9. Headphones: Connect your 1/4" headphones to this output.
10. Master Volume Control: Adjusts the volume of the TransActive Drummer Wireless, the MASTER
OUTPUT on the rear panel and the HEADPHONE OUTPUT on the top panel. This master output
includes Bluetooth playback plus any other devices connected to the INPUTS on the rear panel.
11. EQ: Use these knobs to adjust the levels of the Treble, Mid, and Bass frequencies.
12. Wireless/Aux Volume: This knob controls the level of the paired Bluetooth device and the
Wireless/Auxiliary Input.
13. USB Device Charge: Connect your device's charge cable here to charge it. USB charging only
functions when Transactive Drummer Wireless is powered on.
Note: Users with iPad (3
charging with the screen locked when using iPad (3
14. Bluetooth: Press the Pair/Unpair button to Pair to a Bluetooth device. The Paired LED will be lit when
a device is paired to TransActive Drummer Wireless. This LED will not be lit when TransActive
Drummer Wireless is first powered on (unless it was previously paired with a device). Press the
Pair/Unpair button to disconnect a paired Bluetooth device.
Connect your
Connect a
rd
generation or later) may experience slower charging. We recommend
* WARNING: U.S. users should set this switch
to "100-120V"
European users should set this to "220-240V."
Selecting the improper voltage can damage
the unit.
5
4
6
11 11
9 10 10
rd
generation or later).
4
whereas U.K.
8
2
7
3
1
DEVICE CHARGE
12 12
and most
13 13
14 14