Alto Professional PRESENTER PA Guia Del Usuario página 5

8. Fuse: If the fuse is broken, disconnect the power cord from the power outlet, and then
unscrew this holder to replace the fuse. Replace it with a fuse with an appropriate rating
(printed under on the rear panel). Using a fuse with an incorrect rating can damage the
product and/or fuse.
9. Power Switch: Use this switch to power Presenter PA on or off. Please note that while
Presenter PA is connected to a power source, it does not need to be powered on to
charge the battery.
10. Power Light: This light will illuminate when Presenter PA is powered on.
Top Panel
1. Microphone Input (XLR): Connect a dynamic microphone here.
2. Microphone Mute: Press and hold this button to mute a microphone.
3. Lamp Input (4-Pin XLR): Connect an LED podium lamp (not included) here.
Setup
Items not listed under
Smartphone
Charging and/or
audio playback
(via aux or
Bluetooth)
®
Introduction > Box Contents are sold separately.
Power
Outlet
5