Main Features - Eldes EKB3W Manual Del Usuario

EN
1 . GENERAL OPERATIONAL DESCRIPTION

MAIN FEATURES:

• Arming and disarming
• STAY-arming
• Violated zone bypass and bypassed zone activation
• System configuration
• PGM output control
• Back-light
• Visual indication by LED indicators
• Audible indication by built-in buzzer
EKB3W is a wireless accessory intended for ELDES alarm
systems ESIM364 and EPIR3. This keypad comes equipped with
16 keys and 18 LED indicators and a buzzer for audio indication.
Typically, the configuration of the system by EKB3W keypad
is carried out by activating the Configuration mode using the
installer code and entering a valid configuration command using
the number keys
to clear the characters that have been entered. Alternatively,
*
the user can wait for 10 seconds until the keypad buzzer will
provide a long beep indicating that the entered characters have
been cleared. By pressing any key on the keypad will result in
activation of the back-light lasting for 10 seconds (customizable)
after the last keystroke. When typing in the characters, each
keystroke is followed by a short beep of the keypad buzzer, while
the red indicator lights up reflecting a respective number key
that is being pressed when typing in a configuration
0
9
command (key
Additionally, the LED indicators and the keypad buzzer indicate
the alarm condition.
EKB3W comes equipped with 1 zone terminal designed for
passive wired digital sensor connection, such as magnetic door
contact, and a tamper switch located on the back side of the
device for enclosure state supervision.
It is possible to connect up to 4 EKB3W devices to ESIM364 or
EPIR3 alarm system. The maximum wireless connection range is
150m (492.13ft) (in open areas).
WIRELESS LED KEYPAD EKB3W
, key
0
9
is indicated by red indicator "10").
0
for confirmation and key
EN 9