EVBOX WALL BOX Manual De Instalación página 18

Part number: 9835663080
Wallbox
Descrip-
tion/
reference
number
non active RFID
(factory setting)
Activation
Not applicable
Configura-
Not applicable
tion
Charging Start charging:
• Plug your charging
cable into your EV
and the wall box
Stop charging:
• First unplug the
charging cable from
your EV and then
from the wall box
Refer to the vehicle's
user manual
Note: RFID reader is
not active.
Note: Charging
sessions are not
logged.
*The SMART WALL BOX can be configured as a standard WALL BOX via the EVBox Connect App.
INSTALLATION_WALL_BOX_SOCKET_PSA_B2C_MERGED.indd 19
/
WALL BOX 7,4 kW S 9835663080
active RFID
(user setting)
1. Turn on the supply power to
the wall box.
2. Download the EVBox Connect
App.
3. Enable Buetooth on your
mobile device. Pair the wall
box with the mobile device
via Bluetooth.
4. Add a charge card or key fob
by entering its ID into the
EVBox Connect App under
"Cards" menu.
Note: You can find the wall box
ID and security code on the
label inside the cardboard folder
(which contains the charge card
and key fob).
Select the option "Charge using
charging card" under "charging
settings" menu in the EVBox
Connect App.
Note: Select the option
"Autostart" under "charging
settings" menu in the EVBox
Connect App. in order to disable/
enable the charging card usage.
Start charging:
• Plug your charging cable into
your EV and the wall box
• Scan your charge card/key fob
Stop charging:
• Scan your charge card/key fob
• Unplug the charging cable
from your EV and the wall box
Refer to the vehicle's user manual
Note: RFID reader is active.
Note: Charging sessions are not
logged.
SMART WALL BOX 22 kW S
9835662680*
(factory setting)
1. Make sure that the supply
power to the wall box is off.
2. The user to download the
Smart Wall Box App.
3. The user to set up an user
account for the wall box to be
installed in the back-end.
4. The user to register the
wall box in the Smart Wall
Box Backend using the
charging wall box ID (EVB-
PXXXXXXXX).
5. The user to register the
charge card/key fob using
the contract ID (NL-EVB-
XXXXXXXX) in the Smart Wall
Box Backend.
6. Turn on the supply power to
the wall box.
For more information, please
refer to the Smart Wall Box App
manual.
Start charging:
• Plug your charging cable into
your EV and the wall box
• Scan your charge card/key fob
Stop charging:
• Scan your charge card/key fob
• Unplug the charging cable
from your EV and the wall box
Refer to the vehicle's user manual
Note: RFID reader is active.
Note: Charging sessions are
logged.
11-9-2019 8:30:09
EN
/
19