Time Features - GE HGP6070E Manual De Uso Y Cuidado

Consult the table to find out which function is
the most suitable for the food to be cooked.
Validate by pressing , and the oven will
start cooking.

Time features

2.10 Set cooking time . When the program
has been selected and the temperature
changed if necessary, press
pears on the display (2.10.1) Adjust the time
by pressing or and validate by pressing
(2.10.2). The countdown will start immedi-
ately after adjustment.
When the cooking process ends, a beep will
sound. Press any button to stop the beep.
2.11 Selecting the end time
cooking function, temperature and cooking
time (2.10). Press until
on the display. Press or
end of cooking time and validate by pressing
(2.11.2). While the oven is on hold, a mov-
ing dotted line will appear on the dis-
play (2.11.3). The cooking process will end at
the time indicated. When it ends, a beep will
sound. Press any button to stop the beep.
Note: During the cooking process, the ther-
mometer will flash. When the selected
temperature is reached, a beep will sound.
2.12 Automatic switch-off. If you forget to
switch off the oven, it will switch off auto-
matically after a certain time. If the tempera-
ture is lower than 100 ºC, the oven will switch
off after 10 hours. If the temperature is
higher than 100 ºC, it will switch off after 3
hours.
2.9 Changing the temperature
you have selected the program, press
Change the temperature by pressing
Validate by pressing
pressed and held down, the real temperature
inside the oven will appear on the display.
Note: The cooking process can be stopped at
any time by pressing
oven, press
2.13 Celeris function
dishes requiring preheating.
until ap-
Pyrolytic oven: Select a function (2.9). Press
and then press
for 5 seconds until
Validate by pressing
temperature is reached,
Non-pyrolytic oven: Switch on the oven and
. Select a select a function (2.9). Press
oven will quickly reach the temperature re-
quired for this function. When the tempera-
(2.11.1) appears
ture is reached, the symbol
to adjust the
You can now place the food in the oven.
Note: The Celeris function is not applicable to
some programs.
2.14 Residual heat . If the oven is still hot
after it has been switched off,
on the display. It will only disappear when
the temperature inside the oven drops below
60 ºC.
. When
. If the ºC button is
. To switch off the
.
. Recommended for
again and hold it down
appears on the display.
. (2.13.1) When the
will disappear.
(2.13.2). The
will disappear.
will appear
.
or .
41