Whirlpool 7MWTW1950EW Manual De Uso Y Cuidado página 25

7.
Select Soil Level
Once you select a cycle, select the soil level by turning the
Soil Level knob to the desired setting.
8.
Select Temperature
Once you select a cycle, select the desired wash
temperature by turning the Wash Temperature knob to the
appropriate setting based on your load. All rinses are cold.
Always read and follow fabric-care label instructions to
avoid damage to your garments.
Temperature
Hot
Some cold water is added to save
energy. This will be cooler than your
hot-water-heater setting.
Warm
Some cold water will be added.
This will be cooler than what your
previous washer provided.
Cool
Warm water is added to assist in
soil removal and to help dissolve
detergents.
Cold
This is the temperature from your
faucet. If your tap water is very
cold, warm water may be added
to assist in soil removal and help
dissolve detergent.
Suggested Fabrics
Whites and pastels
Durable garments
Heavy soils
Bright colors
Moderate to light soils
Colors that bleed
or fade
Light soils
Dark colors that
bleed or fade
Light soils
9.
Select cycle options, if desired
If you would like to add an Extra Rinse (Enjuague Adicional)
to most cycles or use the Deep Fill (Llenado Profuno) option,
turn the appropriate knob to "ON."
10.
Press START/Pause
to begin wash cycle
Press the START/Pause (Inicio/Pausa) button to start the
wash cycle. When the cycle has finished, the Done
indicator will light. Promptly remove garments after cycle
has completed to avoid odor, reduce wrinkling, and
prevent rusting of metal hooks, zippers, and snaps.
Unlocking the Lid to Add Garments
If you need to open the lid to add 1 or 2 missed garments:
Press START/Pause (Inicio/Pausa). The lid will unlock once
washer movement has stopped. This may take several
minutes if the load was spinning at high speed. Add
garments, close lid, and press START/Pause (Inicio/Pausa)
again to restart the cycle.
If lid is left open for more than 10 minutes, the water will
pump out automatically.
25