Emtec EKCOH180 Manual Del Usuario página 7

8 en 1 mando a distancia universal
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 15
GB
8 in 1 Universal Remote Control EKCOH180
General Security Note
Technical manipulations of the product or any changes to the product
are forbidden, because of security and approval issues.
Please take care to set up the device correctly - consult your user
guide. Children should use the device only under adult supervision.
Avoid the following :
· strong mechanical wear and tear
· high temperature
· strong vibrations
· high humidity
Please also respect the additional security notes in the various user
guide chapters. For questions not covered from the user guide please
contact our technical hotline or another specialist.
To ensure correct set up please read the manual and security notes
carefully.
Battery change :
The device may only be used with 2 AAA Alkaline batteries - never
try to connect to another power supply. When inserting batteries be
sure the right polarity is used. Remove the batteries when the device is
not used for a longer period. Make sure that the batteries are not short
circuited and are not disposed in fire (danger of explosion)
Batteries do not belong in children hands. Don't let batteries lay
around openly - they might be swallowed by children or animals. If
this happens see a doctor immediately.
Leaking or damaged batteries can upon contact with skin cause bur-
ning or acid damage - if necessary use suitable gloves
Please dispose of batteries in accordance with local bylaws
8 in 1Universal Remote Control EKCOH180
Contents
1) Introduction
2) Put in the batteries
3) Functions of the key
4) Programming of the TV, VCR, DVD , SAT mode, ....
5) Manual code search
6) Automatic code search
7) Brand search
8) Identifying codes found
9) Default Volume Control
10) Troubleshooting
1) Introduction
The 8 in 1 Universal Remote Control is designed to control up to 8 de-
vices (TV, VCR, DVD, DVBT, SAT, ...). The 8 in 1 Universal Remote
Control contains a library of codes that are pre-programmed into the
remote control. This library covers nearly all the audio video products
on the market today.
2) Put in the batteries (always use NEW AAA alkaline batteries)
1. Open the cover on the back of the 8 in 1 Universal Remote Control.
2. Insert 2 AAA alkaline batteries, verify that they are placed correctly with the +
on the battery in the same position as marked inside the battery compartment.
3) Functions of the keys
[1] LED indicator: The indicator light flashes when the remote is operating or
lights continuously while you are programming the remote.
[2] POWER: Allows you to switch off the last selected appliance.
[3] TV, VCR, DVD, SAT: These keys allow you to select the appliance you wish
to control.
[4] SETUP: Allows you to program your remote before the first use.
[5] SHIFT: Allows you to access secondary functions such as Menu, Exit, etc...
Press and release the Shift key, the LED will stay on indicating the Shift mode,
press then the function keys you want. Pressing and releasing the Shift key will
toggle the remote back to normal operation. If no key is pressed after the Shift key
the remote will time-out to normal (non-shifted) operation after 15-20 seconds.
[6] MODE: Select the modes DVBT, CBL, AMP or AUX.
e.g. press and release Mode followed by TV/DVBT mode. Repeat to select TV
Mode.
[7] PROG +/-:
TV, VCR or SAT mode: select the next or the previous channel.

Publicidad

Tabla de contenido
loading

Tabla de contenido