Disposal; Technical Data And Version - Bowa 050-230 Instrucciones De Uso

6.

Disposal

At the end of its service life, the device can be disposed of as normal electrical and
electronic equipment waste. The disposal of the testing device, packaging material
and accessories must be in accordance with relevant country-specific regulations
and laws.
7.

Technical Data and Version

Adapter:
Rated voltage:
Rated current:
Frequency MCU:
Frequency handle:
Frequency cable measurement:
Internal interface: RS232
Test criteria:
Status indicators: Orange (both status indicators) = ready for operation
Casing:
Storage conditions:
Ambient conditions:
Insulation / Classification:
Compliance with standards
EMC
Protection rating
Page 8 Testing Device
100 VAC – 240 AC, 50 / 60Hz
Input current 400mA
Voltage regulated, current limited
Leakage current < 10uA
Replaceable primary adapter
15 V DC
0.5 A DC
16 MHz
20 kHz
Connecting cable resistance
Handle keys
Active cable handle
Insulation resistance conductor to conductor
Measured from the instrument side,
Ligator connection cable according to specifications
Green (continuously)
Yellow
Blue
Red / No reaction
Plastic with feet for console position.
Dimensions: W 240 x D 198 x H 110 mm
Weight:
Temperature
-20 °C to +70 °C
-10 °C to +60 °C
DIN EN 61010:2002 + A1:2002 + A2:2004
DIN EN 61326-1:2006
II
5 to 20 Hz
< 10 Ohms
< 220 Ohms
< 20 Ohms
= test IS OK
= CUT – key pressed
= COAG – key pressed
= ERROR
1.5 kg
Rel. humidity
10 - 100%
10 - 100%
MN030-423-IFU-M098-050230-S3-20151026
> 1 mOhms
Atmospheric
pressure
500 - 1060 hPa
800 - 1060 hPa