Extras - REV Ritter JY-229 Manual De Instrucciones

The loudness can be adjusted by turning the volume switch
(7)
. As well the volume switch is for ON/OFF. The brightness
will be adjusted at the brightness switch
is disturbed you should change the channel at the monitor and
the camera. Take care that at the monitor and the camera the
same channel is adjusted.

Extras

Image-off switch on the monitor (8)
By turning this switch to "off" position you switch off the video
transmission to the monitor. The audio signal will continue to be
transmitted. If you again turn the switch to "on", the image
appears again on the monitor.
Infrared
The infrared mode will be switched on automatically during
darkness. The infrared mode allows you to operate the camera
even during darkness. Integrated IR LED lightens the
surrounding in the invisible infrared range. In darkness, the
maximum covered range is approx. 2m. In daylight the infrared
mode is switched off automatically.
Audio/video output (3)
You can connect a video unit to record the images from the
monitoring monitor via the audio/video output.
Should your television set have a picture-in-picture function,
you can connect the monitor to the television set in order to
view the monitored area parallel to your television program.
21
(1)
. If the transmission