Troubleshooting - REV Ritter JY-229 Manual De Instrucciones

Troubleshooting

With this radio-video monitoring system, you have acquired a
product manufactured according to the state-of-the-art
technology and is therefore safe for operation. Nonetheless,
problems or disturbances can still arise. Therefore, we now
want to explain how you can easily eliminate possible
disturbances on your own.
Error
Possible cause
!
Radio camera or monitor has no power
No image
supply. The status display LED is not
lighted, possibly the power unit is not
properly plugged into the socket or the
batteries are discharged (status display is
lighted in red < 7,5 V).
!
The distance between the radio camera
and receiver is too large.
!
The channels set on the radio camera and
transmitter are not the same.
!
Orientate the aerial of your radio/television
Radio/television
in an other direction.
reception will be
!
Enlarge the distance between the
disturbed if the
monitoring video system and your
device ist active
radio/television.
(on)
!
Don´t put the radio monitoring video
system and your radio/television in the
same electric circuit.
!
Ask a qualified person ( for example a radio
or television technician) for advice.
23