REV Ritter JY-229 Manual De Instrucciones página 25

!
The maximum range was exceeded;
The image,
reduce distance / change position of
the sound is
camera + monitor.
noisy
!
There is a strong source of disturbance
/ disturbed
(e.g. electric motor, radio device etc.)
nearby. The distance between monitor
and camera is too short; this can cause
the monitor to be overloaded. Increase
the distance.
!
Supply voltage is too low, (replace
battery?).
!
Only one camera may operate on each
channel.
!
Similar devices in the surrounding lead to
interferences, e.g. images from other
systems may appear on your monitor.
!
Chice an other channel on your camera
and monitor.
! A similar system operates in the immediate
Strange image
surrounding. Select another channel or
change location.
! Strong spot or floodlight in the monitored
Flickering image
area of the camera.
!
Normal sound,
System monitor wrongly set
dark or a too
(brightness button),
!
bright image.
Strong spot or floodlight in the
monitored area of the camera.
!
The supply voltage is too low (recharge
Only a white
the accumulator or use mains operation).
image on the
!
Monitor is wrongly set (brightness control).
monitor.
24