Control Panel - Ardo FLSN84EW Manual De Instrucciones

PRE-WASH: To carry out a prewash, press button A and add detergent to the ap-
propriate compartment 1. The washing machine will carry out a prewash at 40°C max.
A Prewash is recommended for items soiled with dust, soil, sand or with particularly
resistant stains. See the Programme Table for further information.
TURBO: To reduce the wash time, press the Turbo button B. The operating param-
eters are automatically regulated to ensure an effective wash and to save time. See
the Programme Table for further information.
NO SPIN: Button C can be pressed to disable the fi nal spin in line with the type of
fabrics and personal needs.
START: During the programme and wash options selection phase, the Start LED
will fl ash. To confi rm the selections and start the wash cycle, press "Start" button D.
The LED will stay lit.
EASY LOGIC:The EASY LOGIC system automatically regulates the wash time and water and power
consumption according to the actual amount of washing placed in the drum. The ½ load function
is therefore redundant in that the EASY LOGIC system automatically sets the wash parameters.
Load imbalance check during spinning:
This washing machine is fi tted with a special electronic load balancing control system. Before each
spin, the system makes sure that the clothes are distributed as uniformly as possible in the drum. If
the washing is not distributed uniformly, the fi nal spin speed is reduced for safety reasons, while if
the load is drastically out of balance, the spin is not effected.
SM2714

CONTROL PANEL

7
GB