Swann DVR8-2500 Guia De Instalacion Facil

A
Easy Set Up Components
DVR8-2500 Unit
Power Adapter DVR Power
Cable Adapter
Remote
Cameras and Accessories Optional
Control
C
Connecting the DVR to TV
1
Connect the RCA end of the RCA
to BNC cable to the back of the
TV INPUT socket
2
Back of TV
Connect the BNC plug end of the
cable to the top VIDEO INPUT
socket on the back of the DVR
INPUT
Tune your TV to the correct INPUT -
3
this is sometimes labelled A/V, input,
source, L1, L2, etc. - consult TV
manual for details
Swann Communications • Toll Free Technical Support: USA - 1-800-627-2799, Australia - 1300 13 8324 • Email: tech@swannsecurity.com
Easy Setup Guide
B
BNC to RCA Cable
Cameras Optional
Back of
DVR
1
Connect the camera cable's BNC
socket & DC socket to the BNC
plug & DC plug on the extension cable.
3
Connect the other end of the BNC plug
of the extension cable to the camera
connections on the back of the DVR.
DVR8-2500
Camera Connections
2
Connect the DC power sockets on the extension
cables to the power splitter's DC plugs.
4
Connect the power
splitter's DC socket
to the DC plug on
the power supply.
5
Plug in the DVR and
camera power adapter
to power outlets.
SR342-2DE-50010-240809
www.swannsecurity.com .com