Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
Intended use
The electric drive unit is used for the controlled movement of frames or hospitals beds. It is
only permitted to use it for commercial purposes indoors, on level and dry floors.
Proper use also includes observing and following all information in these instructions, parti-
cularly the safety information and technical data.
Any use of the device beyond this is not considered proper use.
The following tasks in particular are not considered proper use:
Use in areas with slopes or gradients
Driveless shunting / pulling of the frame with the unit lowered (e.g. 'tugger train' travel with
the unit lowered)
Using the unit in explosive atmospheres
Exceeding the rated operating mode's permissible driving time (S3 ED 30% 45 min) in the
'Continuous driving' mode
Private use
Using the unit as a brake
Outdoor use on loose and unsurfaced ground as well as moving over obstacles, e. g. edges
or drain covers
Using the unit in conjunction with components that the manufacturer has not approved for
use with this unit
Using the unit after conversions
Dismantling the unit
Use of the unit by unauthorised persons
Avoiding the risk of fatal injuries
Fatal injuries from electric shock are possible if the device is connected incorrectly.
Only connect the drive unit according to the provided electrical connection diagram.
Avoiding the risk of serious injuries
Risk of shear injury when lifting the drive castor between the fastening plate and unit hou-
sing.
Never put your hand between the fastening plate and unit housing.
Risk of shear injury on the inner parts of the unit. Never put your hand inside the unit, parti-
cularly if it is connected to the control.
Risk of crush injury in the inner parts of the unit. Never put your hand inside the unit, particu-
larly if it is connected to the control.
Risk of injury when moving the drive castor.
16
SAFETY
BASIC SAFETY NOTICES
Publicidad
Tabla de contenido
